HF scientific MicroTSCM Streaming Current Monitor - Manual (Page 6)

MICROTSCM (07/09) Page 2
REV 2.4
1.0 Overview
The SCM–Streaming Current Monitor allows for optimizing and control of dosing
coagulants used for clarification of water. Although the analyzer is capable of displaying
the units in either SCU’s or ICu, this manual will always refer to SCU.
1.1 Unpacking and Inspection of the Instrument and Accessories
The table below indicates the items in the shipment.
Item Quantity
MicroTSCM Analyzer 1
SCM Sensor 1
Sample Chamber 1
Calibration Kit 1
Instruction Manual 1
Remove the instrument from the packing carton. Carefully inspect all items to ensure that
no visible damage has occurred during shipment. If the items received do not match the
order, please immediately contact the local distributor or the HF scientific Customer
Service Department.
2.0 Safety
This manual contains basic instructions that must be followed during the commissioning,
operation, care and maintenance of the instrument. The safety protection provided by this
equipment may be impaired if it is commissioned and/or used in a manner not described in
this manual. Consequently, all responsible personnel must read this manual prior to
working with this instrument.
In certain instances “Notes”, or helpful hints, have been highlighted to give further
clarification to the instructions. Refer to the Table of Contents to easily find specific
topics and to learn about unfamiliar terms.
2.1 Symbols Used In the MicroTSCM
Standard IEC symbols are used on the high voltage cover.
ISO 3864, No. B.3.6 Caution, risk of electric shock .
This symbol indicates that hazardous voltages may be present under this
cover
ISO 3864, No.B3.1 Caution refers to accompanying documents.
This symbol is a reminder to read the sections in the manual referring to the
electrical connections, and potential hazards.