HF scientific Micro100 Laboratory Turbidimeter - Manual (Page 14)

Micro 100 (5/10) Page 8
Rev. 3.3
6.0 User Selectable Parameters
The MICRO 100 provides you the ability to customize your instrument according to your needs at any time
during normal operation. This section describes how you can customize your instrument.
NOTE: You cannot access any of the user selectable parameters during calibration.
Enter the customer selectable parameters section of the MICRO 100 by simultaneously pressing the
key while holding down the key when the instrument is operating in the normal automatic
mode. The "Year" block will be highlighted and the year will be displayed.
NOTE: To skip the selection of any parameter simply press the enter key to continue on to
the next section.
6.1
Setting the Year
With the "Year" block highlighted and the year displayed, change the displayed year using the
or keys. When you have selected the proper year press the enter key to accept the year.
6.2
Setting the Day and Month
After pressing the key, the "Day.Month" block will be displayed and you will see two numbers
on the lower row of the display. The number flashing corresponds to the month. Select the correct
month by pressing the or key to change the displayed month. When you have selected the
proper month, press the key. After pressing the key, the "Day.Month" block will still be
displayed and the second number on the lower row of the display will be flashing: this number
corresponds to the day of the month. Select the correct day by pressing the or keys to
change the displayed day. When you have selected the proper day, press the key.
NOTE: The MICRO 100 is year 2000 (Y2K) compliant and automatically adjusts for leap years.
6.3
Setting the Time
After pressing the key, the "Time" block will be displayed and you will see the time displayed on
the lower row of the display in 24 hour format. The number flashing corresponds to the hour. Select the
correct hour by pressing the or key to change the displayed hour. When you have selected the proper
hour, press the key. After pressing the key, the" Time" block will still be displayed and the
second number on the lower row of the display will be flashing: this number corresponds to minutes.
Select the correct minutes level by pressing the or key to change the displayed minutes.
When you have selected the proper minutes level, press the key.