HF scientific Micro1000 Laboratory Turbidimeter - 0-10,000 NTU - Manual (Page 8)

Rev. 3.2 2
2. Overview
The Micro 1000 process turbidimeter allows you to measure the turbidity of your process water.
The White Light Micro 1000 has been designed to meet the design criteria specified by the US EPA
on turbidity measurement. The Infra-Red Micro 1000 (Micro 1000 IR) was designed to meet the
design criteria specified in ISO 7027 and DIN 27027 for the measurement of the turbidity of a
sample.
2.1.Unpacking and Inspection of the Instrument and Accessories
The table below indicates the items that you should find in your turbidimeter shipment.
ITEM Quantity
Laboratory Turbidimeter 1
Calibration Kit for the MICRO 1000 1
3 Pack of Cuvettes 1
MICRO 1000 Instruction Manual 1
Power Supply 1
Remove the Calibration Kit (Cardboard box), the Package of 3 Cuvettes and the instrument from the
packing carton. Carefully inspect all items to ensure that no visible damage has occurred during
shipment. If the items you received do not match your order, please contact your local distributor or
the HF scientific, inc. Customer Service department immediately.
Note: Extra care should be taken when unpacking, opening, and handling the calibration standards
and sample cuvettes in the Accessory Kit; surface scratches or finger smudges on the cuvette
surface may cause measurement errors. Handle these items by the top area of the cuvette only.