HF scientific MicroTPW Field Portable Turbidimeters - Manual (Page 8)

MicroTPI & MicroTPW (5/10)
Rev. 1.9
2
1.0 Overview
The MicroTPI/TPW allows for the measurement of turbidity in the field. The MicroTPI
was designed to meet the design criteria specified in ISO 7027 and DIN 27027 for the
measurement of the turbidity of a sample. The MicroTPW was designed to meet the
criteria specified in USEPA 180.1 on turbidity measurement.
1.1 Unpacking and Inspection of the Instrument and Accessories
The table below indicates items included in the turbidimeter shipment.
Item Quantity
Field Portable Turbidimeter with 4 AAA batteries installed 1
Instruction Card 1
Instruction Manual 1
Instrument Carrying Case 1
ProCal Calibration Set (0.02, 10.0 , 1000 NTU Standards) 1
Empty Cuvettes 2
Lens Cloth 1
Remove the instrument from the packing carton. Carefully inspect all items to ensure that
no visible damage has occurred during shipment. If the items received do not match the
order, please immediately contact the local distributor or the HF scientific, inc. Customer
Service department.
Warning: Extra care should be taken when unpacking, opening, and handling the
calibration standards and sample cuvettes in the Accessory Kit; surface
scratches or finger smudges on the cuvette surface may cause measurement
errors. Handle these items by the cap of the cuvette only.
Note: The instrument is shipped with the batteries installed.