HK Audio FirNet Manual - Manual (Page 4)

FIRNET Controller 1.1
Congratulations!
You made an excellent choice by opting for the
HK AUDIO FIRNETLinear Phase Controller.
The HK AUDIO engineers who developed the
FIRNET controller dipped into a deep well of more
than ten years experience working with FIR fi ltering
technology, developing state-of-art AD/DA conver-
ters, and programming digital signal processors.
Designed to handle with the greatest ease, this
device helps you effi ciently distribute and process
audio signals to achieve excellent audio results with
our speaker systems.
Please read this manual carefully; your time will
be well-spent as this information will help you
make the most of the device and its performance
potential.
This manual describes the FIRNET controller’s
functions in great detail. If you are knowledgeable
of and experienced with this type of controller and
simply need a quick introduction to the front panel
and its functions, you may wish to consult the
Quick Start Guide on page 6.
Important Notes on Safety
Please read carefully the following instructions
and safety guidelines, and keep them safe for later
reference. Be sure to heed all the cautionary notes
and follow the instructions.
• Do not remove covers; there are no user-service-
able parts inside. Please refer all servicing and
maintenance to qualifi ed service personnel.
• Ensure this device is grounded.
• Position the mains cord so it cannot be stepped
on or pinched, particularly at the plug end, at
power outlets, and at the point it exits the device.
• Use this device only with attachments and acces-
sories specifi ed by the manufacturer.
• This device must be serviced if damaged in any
way, for example, if the mains cord or plug is da-
maged, liquids are spilled or objects dropped into
the device, or if it is exposed to rain or moisture,
dropped, or fails to operate normally.
This is to certify that
HK Audio FirNet™
complies with the provisions of the Directive of the
Council of the European Communities on the appro-
ximation of the laws of the Member States relating to
electromagnetic compatibility according to EMC directi-
ve 2004/108/EC and low voltage directive 2006/95/EC.
This declaration of conformity of the European Com-
munities is the result of an examination carried out by
the Quality Assurance Department of STAMER GmbH
in accordance with European Standards EN61000-6-1,
EN61000-6-2, and EN 60065 for low voltage.
Magdeburger Str. 8, 66606 St. Wendel
Lothar Stamer Dipl.Ing.
Managing Director
St. Wendel, 08/08/2008
Version 2.0 08/2008
B A
Outputs Inputs
dB
Mute Lim Lim OVL
B A dB D C dB
Back Reset
FirNet™
Linear Phase FIR Controller
aes
sync