Human Touch iJoy 100 Robotic Massage Chair - Manual (Page 7)

13 12
www.ijoy.com
TAKE IT
FURTHER
1. Open the horizontal zipper on the front of the backrest.
2. Remove the massage-softening pad from the pocket.
3. Close the zipper.
You can re-insert the massage-softening pad in the future,
following these same steps.
Want a stronger massage?
You can easily remove the massage-softening
pad that comes preinstalled in your iJoy
® -100
chair. But keep it handy, in case you want to
replace it in the future.
TAKE
CARE
General Maintenance
1. Be sure to disconnect the power cord from the electrical outlet before cleaning.
2. Do not use benzene, thinner or any other solvents on your massage chair.
3. Remove dust on the backrest or armrest with a vacuum.
4. If the backrest or a armrests become soiled, wipe with a damp cloth, then a dry cloth.
5. Common vinyl cleaners may be used for tough stains.
6. When cleaning the controller or around the power switch, use a dry cloth only. Never use a damp cloth to clean the controller or power switch.
7. It is suggested that you cover the chair when not in use for a long period of time.
8. The mechanics of this product are specially designed and constructed to be maintenance free. No periodic lubrication or servicing are required.
9. Foreign objects should not be inserted between the massage nodes or the unit housing.
10. When not in use for a long period of time, we recommend that the power cord be coiled and that the unit be placed in an environment free of dust and moisture.
11. Do not store near heat or open flame. Do not leave this product exposed to direct sunlight for long periods of time. This may cause fading or damage.
To keep your product working and looking its best, please follow these simple care guidelines.