Human Touch bodySPA - Manual (Page 4)

humantouch.com
5 5
ENGLISH
humantouch.com
4
Choose a dry, level area in which to install your BodySpa. Moisture, such as that in a bathroom
or near a pool, may cause damage to the unit.
Plug the BodySpa into a grounded wall outlet.
Pull up on the door retention clips to remove them (one on each side). Discard the clips (Fig.1).
Place the cedar deck next to the door you intend to use to enter and exit the BodySpa.
Before using the unit the first time, wipe down the inside bench with a damp cloth.
get ready
1. Drink plenty of water before and after a session, to remain hydrated.
2. Do not use any lotions or oils when using the BodySpa, as they may hinder perspiration.
3. For maximum comfort, enjoy the BodySpa on an empty stomach.
4. To maximize perspiration, take a hot shower or bath before the session. However, dry off thoroughly before entering the unit, as excessive water may stain or warp the wood.
5. To protect the wood from excessive perspiration, place a towel in front of you on top of the unit and keep one handy to wipe off perspiration during the session.
HINTS AND TIPS
1
2
3
4
5
Door retention clip
Fig.1
5
Your BodySpa comes fully assembled – simply select
a suitable location, plug it in, power it on, and you’re
ready to go!
BodySpa
Unpack the Box