IDX CW-7 - Manual (Page 18)

16
4.2. DFS function
When the FREQ SELECT switch selects DFS AUTO, DFS (Dynamic
Frequency Selection) function will be enabled. If DFS detects radio waves
of weather radar (using 5GHz band) the system will automatically search
other available frequency band to avoid interference.
The DFS function is regulated by the radio standard to use the frequencies
of 5250-5300MHz and 5470-5725MHz.
Important Notes
＊ When DFS AUTO is selected, waiting time of the link will be one minute
or more due to initialization.
＊ The waiting time (one minute) occurs in the following cases:
1.Power turned ON and FREQ SELECT switch is set to DFS AUTO.
2.FREQ SELECT switch changed to DFS AUTO position during
operation.
＊ While the system is initializing, the RED and GREEN LINK LED will
switch back and forth from bottom to top repeatedly.
→
Refer P.14 “CW-7 Link initialization”
＊ In the event of conflict with radar wave, DFS automatically enables to
connect to another available frequency without interrupting the video.
＊ MULTICAST with DFS AUTO will not function simultaneously and
Amber LED blinks as “LINK MODE ERROR”
.
→ Refer P.13 “LED indicator functions”