JK Audio Daptor Two - Manual (Page 2)

2
Simply plug Daptor Two into the 2.5 mm headset
jack of any wireless cell phone that accepts a third
party headset or earpiece. You can now send and
receive audio from your mixer or tape recorder
through the cell phone.
Your cell phone will recognize Daptor Two as a
headset which will disable the mic and speaker in
the cell phone. Since Daptor Two replaces the
headset, you will need to provide a microphone and
microphone preamplifier, and a headphone ampli-
fier and headphones to allow conversation to con-
tinue.
Description
7
Input Connectors:
XLR Balanced 600 ohms, line
level, 0 dBm max input.
1/4" mono Unbalanced, line level,
0 dBm max input.
Output Connectors:
XLR Balanced 600 ohms, mic
level, -25 dBm avg output.
1/4" mono Unbalanced, mic level,
-25 dBm avg output.
Wireless
Headset Jack:
¼” - 3 conductor
36” cable provided
(¼”- 3 conductor to
2.5 mm 3 conductor)
Passive, no AC or battery power needed.
Size:
4.5” x 3.2” x 1.3”
(11.4 x 8.2 x 3.3 cm)
Weight: 9
ounces.
Specifications