JK Audio Daptor Two - Manual (Page 4)

4
Connection
Daptor Two will provide the highest quality con-
nection possible between your audio equipment
and cellular telephone. However, due to the un-
predictable nature of wireless telephone service
we cannot guaranty excellent audio quality every
time Daptor Two is used. Audio quality is still
mostly dependent upon the connection provided
by your wireless telephone service.
As a general rule, the better the cell phone signal,
the better your audio quality will be. If your wire-
less phone signal is weak, most phones try to
compensate by increasing their output signal.
This can degrade your audio quality by generating
excessive RF noise. If this happens, make sure to
keep the phone as far away from audio equipment
and cables as possible.
You should also keep in mind that most wireless
telephones have their own level controls. If you
are having level problems that cannot be cor-
rected with the controls on your equipment, try
adjusting the volume on the wireless telephone
itself.
5
Compatibility
Wireless Phone Compatibility
This product was designed to take advantage of
the increasing number of wireless phones that ac-
cept third party headsets and earpiece headsets.
While some wireless phones have the 2.5 mm
jack directly on the phone, others require a head-
set adapter which converts their proprietary con-
nector into the 2.5 mm jack. JK Audio does not
supply these adapters. You must contact your
wireless dealer or your local electronics store to
purchase these adapters.
We’ve designed a circuit which emulates the elec-
trical characteristics of these headsets. Daptor
Two should work with all wireless phones that ac-
cept generic third party headsets. However with
the increasing number of new telephones on the
market and their individual headset characteris-
tics, we cannot guaranty that Daptor Two will work
with every wireless phone available.