Remote control devices, Riu-ip, Guest module 1 – JK Audio innkeeper 1x/rx User Manual

Page 11: Optional remote control devices

Advertising
background image

11

Optional Remote Control Devices

RIU-IP

This remote control interface was designed for use with innkeeper
1x/1rx as well as JK Audio innkeeper 2 and innkeeper 4 digital hybrids.
This unit contains a web server which allows the user to send and re-
ceive control data through their web browser. RIU-IP can be connected
to the user's computer NIC card for direct control, to a switch or hub for
network control, or to an Ethernet port with internet access for control
from anywhere in the world.

RIU-IP Features and capabilities when used with innkeeper 1x/1rx:

RJ-45 Ethernet port

RS-232 remote control port with simple ASCII protocol

No external power required

Indication of incoming ring

On-Hook and Off-Hook

Confirmation of Off-Hook or On-Hook transition

Place call on hold or release hold.

Dial (number) (line).

Auto-Answer on / off

Test tone start / stop

Presence on / off

Caller Ducking on / off

Automatic Gain Control on / off

Guest Module 1

This convenient device gives you remote access to the on-hook/off-
hook and dial features of the innkeeper 1x. The Call button will flicker
when a call comes in and will stay lit while a call is present. When you
dial out using the Guest Module 1 keypad, the tones are sent directly
down the phone line, and do not come back blasting in your ear.

Guest Module 1 features:

Ring and Call LED

Call and Drop buttons

DTMF Keypad

Keypad disable switch

Remote powered


Contact your JK Audio dealer for additional information on either of
these optional devices.

Advertising