JK Audio innkeeper 4 - Manual (Page 12)

12
Remote Jack
The 10 pin RJ-50 jack on the back of the Innkeeper 2/4 provides
a proprietary connection to the supplied remote terminal block. A
1 meter cable is provided for this connection.
Remote Terminal Block
The Remote Terminal Block includes an Off-Hook signal pin and
a Call/Drop control pin for each phone line channel. The OH
signal pin is current limited to 50 mA, 5 VDC. The control pin
toggles the corresponding phone line off-hook / on-hook with a
connection / break from ground.
The Innkeeper 2/4 menu is controlled by the directional arrows,
alpha numeric keypad and Enter button. You may use either the
arrow keys to scroll through the menus or the keypad to directly
select menus and use the Enter button or the keypad to make
your selections. Through the menu you have access to the
following. The () indicate the numeric entry used to automatically
access these menus without scrolling. For example to access the
Call History View menu directly, you would press 2 Enter 1 Enter.
Backlit Menu Display and Controls
Phone Book(1) A 50 entry name and number phone book for
storing speed dial numbers.
Phone Book View(1,1) - Allows you to view name and phone
numbers of added entries. You may dial the selected entry from
this menu by simply pressing the Call button on any phone line.
Phone Book Add Entry(1,2) - You may add new entries from this
menu. After pressing Enter, you will be prompted for the entry
phone number. You may enter a 2 second pause in your phone
number entry by pressing the > key. Multiple > key presses will
enter multiple 2 second pauses. The display will show a "."
between the numbers for each 2 second pause entered. After the
Enter button is pressed again you will be prompted for the entry
Name. Alpha characters may be selected by using the multitap
feature. For example, to enter the character "a" you would press
the 2 key. To enter "b" you would press the 2 key twice. Hitting a
Operation (cont)