JK Audio innkeeper 4 - Manual (Page 6)

6
Connecting Cables
Auxiliary Telephone(s)
Although each application will require a slightly different setup,
following is a general cable connection setup and explanation.
Phone Line - Connect the supplied RJ-11 phone line cable(s)
between the RJ-11 jack(s) marked "Line" and your analog phone
line jack(s). Be sure these jacks can support standard analog
telephone operation. The Innkeeper 2/4 will not work with "dry
pair" phone line connections.
Send XLR - Connect a line level (mix-minus) audio signal to the
Send jack(s) on the Innkeeper 2/4. Audio will be sent down only
the corresponding phone line.
Master Send - Connect a line level (mix-minus) audio signal to
the Master Send input. Audio will be sent down either or both
phone lines based upon your selections in the menu controls.
Caller XLR - Connect the Caller output jack(s) to line level
input(s) on your audio equipment. Each caller output jack will
contain audio only from its corresponding phone line. Local
audio and audio from alternate phone lines will not be present on
these jacks.
Power - Connect the supplied power cable to a 120 - 240 VAC
power outlet.
You can use an auxiliary telephone to place or screen a call, and
then the call can be placed on hold. When you are ready to take
the call on Innkeeper 2/4, simply press the Call button for the
corresponding phone line. Your telephone will automatically
release the hold while you talk. If you need to take the call back
on the auxiliary telephone, simply pick up the phone before the
Innkeeper 2/4 Drop button is pressed for that line.
Operation