JK Audio Outerloop - Manual (Page 16)

10
Outerloop Wireless Intercom Beltpack
Disconnecting from a device
with Bluetooth Wireless
Technology
Since Outerloop has no other function
when Bluetooth is powered down, you
may simply turn off the Power switch
to disconnect from the Bluetooth
device.
If you wish to leave Outerloop
powered up while Bluetooth is
powered down, simply press and hold
the Pair button for 5 seconds.
When a Bluetooth connection is
dropped or terminated, Outerloop
returns to Idle Mode. If the unit
is in Idle Mode for >2 minutes
without a connection, Bluetooth will
automatically shut off. You may restart
Bluetooth by either turning the power
switch off and on again, or pressing
the Pair button for 2 seconds.
Bluetooth Wireless Technology
Connection History
Outerloop retains a history of the
16 most recent devices. To clear
the connection history and return to
factory reset, hold the Pair button in
for at least 20 seconds. After resetting,
Outerloop will return to Pairing Mode.