JK Audio QuickTap - Manual (Page 2)

2
Install QuickTap between the handset and the
telephone base of your existing telephone.
1. Unplug the handset cord from your tele-
phone base.
2. Using the black handset jumper cord that we
have provided, connect the telephone jack of
QuickTap to the handset jack on your tele-
phone base.
3. Plug your handset cord, and handset, into
the handset jack on QuickTap.
4. Connect your audio equipment to the line
output jack on QuickTap.
Handset w/
modular plug
Telephone line
to wall jack
Audio equipment or
powered speakers or
computer Mic input
Connection
7
Repairs to this telephone equipment can only be
made by the manufacturer or its authorized
agents or by others who may be authorized by
the FCC. For repair procedures, follow the in-
structions outlined under the warranty section of
the manual.
4. Rights of the telephone company
If telephone equipment is causing harm to the
network, the telephone company may temporarily
discontinue your telephone service. If possible, they
will notify you before they interrupt service. If
advanced notice is not practical, you will be notified
as soon as possible. You will be given the
opportunity to correct the problem, and you will be
informed of your right to file a complaint with the
FCC.
Your telephone company may make changes in its
facilities, equipment, operations or procedures that
could affect the proper functioning of your JK Audio
product. If such changes are planned, you will be
notified.
If this telephone equipment is to be used with a
telephone that is leased or owned by another party,
permission to connect this telephone equiment to
their telephone must first be obtained.
FCC Registration (continued)