JK Audio QuickTap - Manual (Page 4)

4
FAQ’s
?
Will the QuickTap work with my telephone?
!
The QuickTap will work with virtually any tele-
phone that is not cellular and does not have a
keypad in the handset. It is compatible with
analog, digital, PBX, and ISDN telephones and
systems. We cannot guarantee that it will work
with every telephone out there, but we have yet
to hear of one it does not work with.
?
How do I get both of my powered speakers
to work with the QuickTap?
!
You will need to get a mono to stereo converter
to go between the speakers and the QuickTap.
These are readily available at most electronic
stores.
?
The QuickTap works great for recording
conversations but how do I send a re-
cording down the telephone line?
! The QuickTap is a receive only device. If you
want to send recorded audio down the line, you
should purchase a THAT-1, THAT-2 or a Voice
Path.
5
Specifications
Line Output Connector 1/8" Mono jack
Output Impedance
600 ohms
Output Level 100 mV RMS
Isolation 1500 VRMS
Handset and Telephone connectors:
Modular 4pin/4wire handset jacks
Compatibility Note: Not all telephones are built
alike so we cannot guarantee QuickTap will
work with any handset design out there. We
designed QuickTap to work with most popular
telephones.
QuickTap is not for use with cellular phones or
telephones that have a keypad built into the
handset.