JK Audio RemoteAmp Blue - Manual (Page 5)

12
? What is the range of the Bluetooth receiver?
! RemoteAmp Blue will receive audio signals up to
30 feet (10 meters) from your Bluetooth device.
? How long will the battery last?
! Based on our tests using a standard alkaline bat-
tery, with RemoteAmp Blue about 1 meter from a
Bluetooth device the battery should last for about
10 hours under normal use.
? Can I connect a microphone to the XLR input?
! No, this input is line level only. You need to con-
nect your mic to a mixer or pre amp first
.
? Can I connect this to my intercom unit?
! Yes, this headphone amplifier works well when
connected to a ClearCom, RTS or Telex 3-pin
XLR party line intercom link so you can monitor
the feed, even while listening to the 3.5 mm ste-
reo input.
? Can I pair my RemoteAmp Blue to two cell
phones and receive audio from two locations
simultaneously?
! No, your RemoteAmp Blue can only be paired to
one Bluetooth enabled device at a time.
FAQs
5
Features
paused, such as when you receive an incom-
ing phone call, the red stereo LED will turn off
until the music resumes playing.
3. This LED flashes blue when setting up or using
a Bluetooth connection. See page 11 for timing
diagrams. The LED will illuminate briefly when
the unit is first powered on.
4. The Bluetooth control will set the level of audio
from your Bluetooth input.
5. This red LED indicates when the power is
turned on. As an indicator of low battery, the
red power LED will grow dim and then extin-
guish a short while before the battery is com-
pletely exhausted and the unit shuts down.
6. Press this Power button in to activate the unit.
Press again to turn the unit off.
7. The blue Multi-Function Button (MFB) is used
to establish a connection with your Bluetooth
enabled cell phone, laptop or other device.
12
? What is the range of the Bluetooth receiver?
! RemoteAmp Blue will receive audio signals up to
30 feet (10 meters) from your Bluetooth device.
? How long will the battery last?
! Based on our tests using a standard alkaline bat-
tery, with RemoteAmp Blue about 1 meter from a
Bluetooth device the battery should last for about
10 hours under normal use.
? Can I connect a microphone to the XLR input?
! No, this input is line level only. You need to con-
nect your mic to a mixer or pre amp first
.
? Can I connect this to my intercom unit?
! Yes, this headphone amplifier works well when
connected to a ClearCom, RTS or Telex 3-pin
XLR party line intercom link so you can monitor
the feed, even while listening to the 3.5 mm ste-
reo input.
? Can I pair my RemoteAmp Blue to two cell
phones and receive audio from two locations
simultaneously?
! No, your RemoteAmp Blue can only be paired to
one Bluetooth enabled device at a time.
FAQs
5
Features
paused, such as when you receive an incom-
ing phone call, the red stereo LED will turn off
until the music resumes playing.
3. This LED flashes blue when setting up or using
a Bluetooth connection. See page 11 for timing
diagrams. The LED will illuminate briefly when
the unit is first powered on.
4. The Bluetooth control will set the level of audio
from your Bluetooth input.
5. This red LED indicates when the power is
turned on. As an indicator of low battery, the
red power LED will grow dim and then extin-
guish a short while before the battery is com-
pletely exhausted and the unit shuts down.
6. Press this Power button in to activate the unit.
Press again to turn the unit off.
7. The blue Multi-Function Button (MFB) is used
to establish a connection with your Bluetooth
enabled cell phone, laptop or other device.