K-array KAN200 - Manual (Page 13)

KAN200
REV. B 13
12. SPECIFICATIONS
Acoustics
Speaker power handling 150 W (AES)
Max power 300 W (1)
Impedance 64 Ω
Frequency range 150 Hz – 18 KHz +/- 6dB (2)
SPL 1W/1mt 86 dB (3)
Maximum SPL 96 dB continuous – 102 dB peak (4)
Coverage
Horizontal 160°
Vertical 10°
Crossover
Type External cross over required
Frequency 150Hz, 24dB/oct suggested minimum
Transducers
Full-range 8 x 1” Neodymium cone driver with 0.75” voice coil
Power Audio Input
Connectors 2 x 4-pin speakon (1 female, 1 male)
Wiring 1+ 1- (signal IN & LINK) 2+ 2- (Through)
Recommended Amplifiers
KA40 for up to 16 units each channel and KMT12 or KMT18 for up to 8
units
Certification
IP 55
Physical
Dimensions 201.9 x 5.6 x 3.53 cm (79.5” x 2.2” x 1.4”)
Weight 1.4 Kg (3.09 lbs)
Notes for data
1. Maximum RMS applicable power for a musical signal. The reference signal is the one proposed
by EIAJ standard;
2. With dedicated preset;
3. Mesured @8 m, then scaled @1 m;
4. Mesured with musical signal;
New materials and design are introduced into existing products without previous notice. Present
systems may differ in some respects from those presented in this catalogue.