K-array KAN200 - Manual (Page 7)

KAN200
REV. B 7
6. SAFETY
WARNING
Warning . Failure to follow these safety instructions could result in fire, shock or other injury or damage to the device
or other property.
Safety and handling information
It is important that loudspeaker systems are used in a safe manner.
Avoiding Hearing Damage. Professional loudspeakers are capable of producing extremely high sound levels and should be used
carefully. Never stand close to loudspeakers driven at high volume. Set the volume to a safe level. Over time you can adapt to a
higher volume that may sound normal but can be damaging to your hearing. Hearing loss get worse every time you’re exposed to a
sound level of 90 dB or over for an extended period of time. If you experience ringing in your ears or muffled speech, stop listening
and have your hearing checked. The louder the volume, the less time is required before your hearing could be affected.
Choking Hazards. This device contains small parts, which may present a choking hazard to small children. Keep the device and its
accessories away from small children.
Keeping the Outside Clean. Handle the device with care to maintain its appearance. To clean it, unplug all cables and turn it off. Then
use a soft, dry or slightly damp cloth. Don’t use window cleaners, household cleaners, aerosol sprays, solvents, alcohol, ammonia,
or abrasives to clean the device.
Carrying, Handling and Installing the device. The device contains sensitive components. Do not drop, disassemble, open, crush,
bend, deform, puncture, shred, microwave, incinerate, paint, or insert foreign objects into it.
Do not operate speakers for an extended period of time with sound distortion. This is an indication of malfunction, which in turn can
generate heat and result in a fire.
To reduce the risk of overheating , avoid installing it near heat emitting appliances, such as a room heater or stove.
No naked flame sources such as lighted candles should be placed near the device.
Operate the device in a place where the temperature is between -20°C and 50°C (-4°F to 122° F). Avoid dramatic changes in
temperature or humidity when using it, as condensation may form on or within the device.
Set your device up on a stable retaining surface. Install the unit only in a location that can structurally support the weight of the unit,
far away from people who can interfere with the stability of the system. In case of outdoor installation, assure that the wind does not
interfere with the system’s stability, taking extra securities like any certified anchoring systems. Doing otherwise may result in the
unit falling down, causing personal injury or property damage. The system should only be suspended by qualified personnel following
safe rigging practices. Secure fixings to the building structure are vital. To clarify any doubt you may have, seek help from architects,
structural engineers or other specialists.
This audio system is not intended for use in nuclear facilities, aircraft navigation or communication systems, air traffic control
systems,or for any other use where any malfunction or failure of the audio system could lead to death, personal injury, or sever
environmental damage.
Do not make repairs yourself. Caution, risk of electric shock. Do not open the device, it contains potentially hazardous voltage.
Never attempt to disassemble, repair or modify the system yourself. Disassembling the unit may cause damage that is not
covered under the warranty. The device contains no user-serviceable parts. Repairs should only be performed by manufacturing
trained service personnel. Do not connect the unit to an amplifier if you suspect that your device needs service or repair.
Read all safety information below and operating instructions before using this device to avoid injury.