Kessler CAMERA SLIDERS: Parallax Installation Guide - Manual (Page 3)

Step 6
Align bottom 3/8” stud of Parallax cart with hole on slider carriage as shown
Step 5
Collapse Parallax cart towards bearing assembly and slide Parallax bearing assembly
over the Parallax rail from the slider’s drag end (non-crank end for Pocket Dolly v2.0)
Fig. E
Step 4
Loosen rail knobs and angle Parallax rail away from drag end of the slider (non-crank
end for Pocket Dolly v2.0 and either end for Pocket Dolly v2.0 Basic)