Krell S-1500 - Manual (Page 12)

Back Panel Description, continued
7 12 VDC Remote Power In
The S–1500 amplifier is equipped with an input that receives
12 VDC power on/off (12 V trigger) signals from other Krell compo-
nents and other devices that incorporate a 12 V trigger. This allows
you to turn the S–1500 on and off using a Krell or other component
in a custom installation.
Consult the owner’s manual of each component used in a custom instal-
lation to take full advantage of the S –1500 amplifier remote capability.
8 IEC Connector
The connector is for use with the provided IEC standard 15 amp
power cord.
The AC mains fuse must be replaced with the spare fuse provided. Use
the 12A 1/4-inch slow-blow fuse for 100 –120 VAC, and use the 6A 1/4-
inch slow-blow fuse for 220 –240 VAC.
Turn off the AC power and unplug the power cord before changing the
AC mains fuse.
9 Fuseholder
The AC mains fuse protects the S –1500 amplifier in the event of
an internal fault.
BACK PANEL REMOTE
CONNECTIONS,
continued
Note
Note
POWER
WARNING
12 Krell S–1500 Multi-channel Amplifier