Krell S-350av - Manual (Page 2)

1 2 3 8 9 11 12 13 14 15 17 18 19
4 5 6 7 10
Figure 1 The S-350 Front Panel
Figure 3 The S-350 Remote
23
24
25
26
16
21
22
Figure 2 The S-350 Back Panel
27 28 29 30 33 32 31 35
34
Krell ® is a registered trademark of Krell Industries, LLC, and is restricted for use by Krell Industries, LLC. its subsidiaries, and authorized
agents. TosLink ® is a trademark of Toshiba Corporation. All other trademarks and trade names are registered to their respective companies.
© 2006 by Krell Industries, LLC, All rights reserved
Back Panel
2 Krell S-350 Krell S-350 3
Front Panel
and Remote
POWER
1 Power
Switches the S-350
between stand-by and
operational modes.
2 Stand-by and
Power LED
Stand-by. The red
stand-by LED
illuminates when the
S-350 is switched on
from the back panel,
indicating that the
player is in the stand-
by mode and ready to
be switched to the
operational mode.
Power. The blue
power LED illuminates
when the S-350 is in
the operational mode.
3 Infrared Sensor
Receives commands
from the S-350 remote
control. For proper
remote control
operation, do not
obstruct the infrared
sensor.
TRANSPORT
4 Play
Starts playback from
the beginning of the
disc.
5 Stop
Stops disc playback.
6 Pause
Temporarily suspends
playback of a track.
To resume playback at
the point pause was
engaged, press play.
7 Eject
Ejects disc from
transport.
8 Track Forward
and Back
Selects the track that
follows or precedes
the current track.
Press repeatedly (do
not hold) to skip
multiple tracks
9 Search Forward and
Back
Press to scroll forward
or backward in the
current track. Press
play (4) to re-turn to
normal playback.
10 Directional Arrows
Press the up, down,
left, or right arrows to
navigate the
operational menu and
DVD navigation
choices.
11 Enter
Press to select
choices from
operational menu and
DVD navigation.
12 Menu
Access DVD menu
(S-350av).
13 Title
Selects the active
DVD title (S-350av).
14 Setup
Basic Setup menu for
S-350av.
15 Device Menu
Access EV 525
operational menu.
To set up a program.
Press PROG (16)
then enter a track
number and press
ENTER (11). Repeat
until all desired tracks
are entered. Press
PLAY (4) to begin the
program.
To exit the program
mode. Eject the disc
(7) or press STOP (5)
and then press PROG
(16) twice.
16 Prog
Press PROG to begin
programming a
sequence of tracks. If
a disc is playing, press
STOP (5) and then
press PROG.
DISPLAY
17 Display
Cycles the front panel
display between 4
choices: remaining
track time, elapsed
track time, elapsed
time on the disc, and
remaining disc time.
18 Dim
Adjusts the
illumination of the front
panel display (19).
19 Front Panel Display
Shows disc type and
format, and the
current status of the
disc.
20 Disc Transport
Holds the disc.
REMOTE ONLY
21 Audio
Selects desired audio
track on DVD
playback (S-350av).
22 Subt
Selects subtitles
(S-350av).
23 Input
Selects desired audio
imput drive, optical, or
coaxial.
24 Repeat A/B
Loop between 2
predetermined points
within a single track or
sequential tracks.
25 Angle
Selects desired
desired angle on DVD
playback (S-350av).
26 Return
Returns to the
previous menu
screen.
ANALOG AUDIO OUTPUTS
27 L and R Balanced Analog
AudioOutputs
One pair of balanced outputs with
XLR connectors.
28 L and R Single-ended Analog
Audio Outputs
One pair with RCA connectors.
DIGITAL AUDIO OUTPUTS
29 Optics Output
One EIAJ fiber optical digital
output with a TosLink connector
30 Coax Output
One S/PDIF coaxial digital output
with an RCA connector.
BACK PANEL REMOTE
CONNECTIONS
31 12 VDC In/Out
(12 V Trigger)
Out. Sends 12 VDC power on/off
signals to other Krell components
and devices that incorporate a 12
V trigger.
In. Receives 12 VDC power on/off
signals from other components
and devices that incorporate a 12
V trigger.
32 RC-5 In
Accepts baseband RC-5 input
commands from hardwired
remote controllers.
33 RS-232
The RS-232 communication port
allows you to send and receive
operational instructions to and
from the S-350 via an external
computer control system.
34 Video Outputs (S-350av)
One each: composite video,
s-video, analog component (Y,Pb,
Pr), and HDMI.
POWER
35 Back Panel Power Switch
Use this switch to change the S-
350 from off to stand-by.
35 IEC Connector
Use the provided IEC standard 15
amp power cord.
IMPORTANT
Do not attach enhancement
accessories such as rings, mats,
or dampers to individual discs.
These accessories may interfere
with the disc transport, resulting
in erratic playback and/or poor
sound.
Note
The S-350 incorporates an
advanced suspension system and
does not require additional mass
coupling or isolation. You may
experiment with feet or cones as
long as they are not permanently
affixed to the unit. Any unauthorized
modification to the unit or electronics
voids the warranty
.