Victoria features – LandAirSea Victoria GPS Tracking System User Manual
Page 5
V I C T O R
I A 2 0 1 0
Victoria Features
The following images identify the buttons and LED’s that are either active or
inactive on the Victoria device.
2
#
Button / LED
Comments
1 N/A
Button Not In Use
2 N/A
Button Not In Use
3 N/A
Button Not In Use
4 N/A
Button Not In Use
5 N/A
Button Not In Use
6 ON
This LED will flash once every ten (10) seconds when Victoria is in an
active (awake) status
7 GPS
GPS LED will flash once every two (2) seconds when locked onto GPS
and when Victoria is in an active (awake) status.
8 Battery
LED will flash when charging and in low battery condition.
Note: There is no on/off switch on the Victoria. After 2 minutes, your device will go into a low
power sleep mode. If not deployed, be sure the device is not disturbed to avoid unnecessary
battery drainage.
For more information and resources for LandAirSea GPS Systems, please visit us online at
www.landairsea.com.
Should you have any additional questions, please email us at