Brinkmann ELITE SERIES 4685 - Manual (Page 7)

6
CAUTION! Some parts may
contain sharp edges.
Wear protective gloves
if necessary.
NOTE: Make sure all control knobs are
in the off position, LP tank valve
is closed and tank is
disconnected from regulator and
removed from grill.
Step 1
Remove hose / regulator from side
burner valve and main burners
manifold by unscrewing hose /
regulator nuts. Remove igniter wire
from electrode.
Step 2
Remove control knobs and bezels
from main control panel. Set aside for
later use.
NOTE: It is helpful to keep the screws
with the components as they
are removed for ease of
reassembly.
Hose / Regulator Nuts
Main Control
Panel Bezels
Igniter Wire