Brother MFC 9840CDW - Manual (Page 17)

Printing
10
1
Calibration
1
The output density for each color may vary depending on the environment the machine is in such as
temperature and humidity. Calibration helps you to improve the color density.
a
For MFC-9440CN and MFC-9450CDN, press Menu, 4, 5.
For MFC-9840CDW, press Menu, 4, 6.
For DCP-9040CN and DCP-9042CDN, press Menu, 3, 5.
b
Press a or b to select Calibrate.
c
Press OK.
d
Press 1 to select Yes.
e
Press Stop/Exit.
You can reset the calibration parameters back to those set at the factory.
a
For MFC-9440CN and MFC-9450CDN, press Menu, 4, 5.
For MFC-9840CDW, press Menu, 4, 6.
For DCP-9040CN and DCP-9042CDN, press Menu, 3, 5.
b
Press a or b to Reset.
c
Press OK.
d
Press 1 to select Yes.
e
Press Stop/Exit.
Note
If an error message is displayed, press Stop/Exit and try again. For more information, see
Troubleshooting and routine maintenance in the User’s Guide.
Auto Registration
1
Registration
1
If solid areas of color or images have cyan, magenta or yellow fringes, you can use the auto-registration
feature to correct the problem.
a
For MFC-9440CN and MFC-9450CDN, press Menu, 4, 6, 1.
For MFC-9840CDW, press Menu, 4, 7, 1.
For DCP-9040CN and DCP-9042CDN, press Menu, 3, 6, 1.
b
To start, press 1.
To exit, press 2.
c
Press Stop/Exit.