LaserLyte RL-TOOL - Low Rez Size - Manual

RL-TOOL
Instructions
Installing Rear Sight Laser:
Unload your firearm.
Remove slide from frame, then remove spring & barrel.
Insert the rear sight laser on your slide. Align side of dovetail
with sight tool.
Use the adjustable clamp screws to hold the slide at the
proper height.
Turn the T-handle clamp until the extractor pushes the rear
sight laser into the center of the slide.
1
2
3
4
5
2
1
3
4
4
5
UNLOAD YOUR FIREARM!
YES
YES
NO
NO
40618 RL_TOOL.indd 1 8/11/10 4:48 PM