Baby Trend FLEX-LOC INFANT CAR SEAT E30FL0211U - Manual (Page 14)

27 26
5.0
FEATURES
5.0
FEATURES
Seat Angle Indicator
CORRECT
WRONG
20 poun
ds
(9 kg) an
d
under
20 t
o 30
poun
ds
(9 to 13.6
kg)
Locking Clip
Seat Angle Adjuster
5.7 Operation of the Carry Handle
• The Carry Handle has three positions:
the upright carry position, a mid-storage
position, and the non-rocking position.
• Depress the two buttons located on the
handle just above the connection to the
Safety Seat shell to release the handle.
• Slowly rotate the handle to the desired
position. The buttons should pop out
and the handle should automatically
lock into the new position.
• Before lifting the Safety Seat, push on
the handle to check that both sides of
the handle have locked into place.
• Use the Mid Storage or non-rocking position
when the Safety seat in the vehicle. Mid Storage in
vehicle position
Non Rocking in
vehicle position
Rotate the Handle
Upright Carry
Crotch Strap
The crotch strap is adjustable in length to ensure a safe and
comfortable fit for harness.
Seat Angle Indicator
The Seat Angle Indicator
is used to ensure that the
seat is installed at the
proper degree of recline to
adequately protect your child
in a crash.
Locking Clip
The Locking Clip is stored under the
pad on the right side of the Safety Seat
and is used to securely install the Safety
Seat with certain types of vehicle lap/
shoulder combination belts.
Seat Angle Adjuster
The Seat Angle Adjuster raises and
lowers the rear of the Base in order to
obtain the proper angle of recline for
proper installation of the Safety Seat
when using the Base.