Warning, Infant restraint – Baby Trend FLEX-LOC INFANT CAR SEAT E30FL0211U User Manual

Page 18

Advertising
background image

35

34

6.0

INFANT RESTRAINT

USING INFANT RESTRAINT

6.1 Securing your Child in the Safety Seat / Carrier

In a crash, the safety seat provides no protection for your child

unless the Harness Straps are properly installed according

to these instructions. Make sure that the harness straps are

properly adjusted and secured whenever using the Safety Seat,

even when using as a carrier.

Please follow these instructions carefully to properly secure your

child.

1. Check that the Harness Straps are installed in the proper slots

or adjusted to the proper height as described in section 5.9,

Adjustment of the Shoulder Straps, preceding.

Failure to properly secure your child in the Safety Seat /

Carrier increases the risk of death or serious injury from

suffocation or falls, or in the event of a sharp turn, sudden

stop or crash.

WARNING

2. The clothing you dress your child in will

affect the proper use of the Safety Seat.

Please dress your child in clothing that will:

• Allow the Harness Straps to securely latch

between your child’s legs.

• Keep the shoulder straps properly located

on your child’s shoulders.

3. Place the Safety Seat on a firm and level

surface. Move the carry handle to the non

rocking position. Loosen the Harness Straps

by pulling on the straps while pushing on the

Harness Adjuster Button located below the

pad just in front of the buckle. Unfasten the

Harness Chest Clip. Unbuckle the Harness

Straps and drape the Harness Straps over

the Seat back or to the sides of the Safety

Seat. (Fig. 35-1)

4. Place your child in the Safety Seat so that

the child’s bottom is against the back and

bottom of the seat. (Fig. 35-2)

5. Pull the harness straps down over your

child. Check that the harness straps are not

twisted.

Fig. 35-1

Fig. 35-2

Correct

Incorrect

6.0

INFANT RESTRAINT

Advertising
This manual is related to the following products: