OSD Audio Soundsole 2.1 - Manual (Page 9)

AUDIO CONNECTIONS
The OSD AUDIO SOUNDSOLE 2.1 has three
Audio Input connections on the rear panel
that can be used for TV audio or connection
to other sources such as CD player, a
portable music player (that does not have
Bluetooth), a computer or any audio source
with one of the following output connections.
3.5mm AUX INPUT
Connect the 3.5mm AUX cable to the Headphone
output of any non Bluetooth device such as a iPod or
Laptop Computer. Headphone connection is Analog
and typically two channel stereo. Connect to the single
3.5mm to the single 3.5mm line 1input. This input is
selected by pressing the ‘SRC’ (source) button on the
SOUNDSOLE 2.1 IR Remote. It sequences through
line1, line 2 and optical input.
OPTICAL DIGITAL AUDIO
Connect the Optical Digital Audio OUT on a
TV or other source to the OSD AUDIO SOUNDSOLE
2.1 Optical Input using a Digital Optical Audio Cable as
shown. This Input is selected by pressing the SRC
button on the included IR Remote. NOTE: The audio
output of a TV, Blu-ray Disc player, game console, or
DVD player connected to the SOUNDSOLE 2.1 via
Optical Digital, must be set to PCM in the
source’s
setup. Digital connection to a CD player does not
require a special setting.
L&R AUDIO
Connect the L&R Audio OUT on a TV or other source
to the SOUNDSOLE 2.1 L&R Audio Input using a
Stereo RCA-RCA Patch Cable as shown. This Input is
selected by pressing the
‘SRC’ (source) button on the
included IR Remote.
Sound Platform
Audio Inputs
EXTERNAL POWER SUPPLY
After all audio connections have been made and
confirmed, connect the female end of the included External
Switching Power Supply to the AC Input on the SOUNDSOLE 2.1
rear panel, and then plug the AC power cord into an un-switched
AC outlet. The AC connection is a universal power connection
that will automatically handle AC voltage from
100-240VAC.
RCA Stereo Patch Cords
Fiber Optic Digital Cable
Multi Voltage
Switching Power
Supply
3.5mm Stereo AUX Cable
Page 9