Photoflex DP-FSPDKT FirstStudio Product Kit User Manual

Firststudio product kit, Firststudio, Product kit instruction sheet • item

Advertising
background image

PROFESSIONAL PHOTOGEAR

Visit photoflex

lightingschool

.com® for the best free learning resource!

For detailed specifications,

product tutorial videos

and more, please visit

www.photoflex

®

.com

Rev 11/20/13

FirstStudio

®

Product Kit Instruction Sheet • Item #:

DP-FSPDKT, DP-FSPDKTLG

This kit includes:

Figure 1

A. (2) FirstStar Lamp Heads

B. (2) 250 Watt Bulbs

C. (2) Adjustable Swivel

D. (2) 6.5' Compact LiteStands

E. (1) Medium LiteIgloo

19.75" x 19.75" X 19.75"

(50.2 cm x 50.2 cm x 50.2 cm)

Replacing the Lamps

The First Star lamps give approximately 800 hours of use, but a
spare is a good idea. Bulbs can be replaced when cool, the same
way a household bulb is changed. The inner tungsten halogen lamp
is protected by a shatter resistant Pyrex

®

outer shell, so no worries

about the oil in your hands causing blistering or otherwise damag-
ing the bulb. Replace with 250 watt bulb (SKU # DP-250B). Other
bulbs may be used, as long as they do not exceed 250 watts.

Connecting the FirstStar Lamphead to Your Swivel

1. First loosen the securing knob on the swivel.

Figure 2

2. Line up the Swivel with the track on the lamphead and slide into

center position.

Figure 3

3. Once you have the lamphead in position, tighten securing knob.

Figure 4

Setting up Your LiteStands

4. Loosen the securing knob on the brace collar.

Figure 5

5. Slide the brace collar down as you pull out the legs.

Figure 6

6. Secure the brace collar.

Figure 7

7. To adjust the height of the LiteStand, loosen a knob below the

section you wish to lift and pull the section up to the desired

height; then tighten the knob to secure the section.

Figures 8, 9 and 10

FirstStudio Product Kit

The FirstStudio Product kit utilizes our medium pop-open
LiteIgloo

®

. Including two FirstStar 250 watt tungsten lights to

evenly illuminate the Igloo, this kit offers soft, shadowless light that
is perfect for shooting your products or collectibles.
(Also available as DP-FSPDKTLG which uses the large LiteIgloo
31.5" x 31.5" x 31.5")

Figure 3

Figure 2

Figure 4

Figure 5

Figure 7

Figure 6

Figure 8

Figure 9

Figure 1

A

B

C

D

E

A quick word about SAFETY:

The high wattage bulbs in the FirstStar will burn hands when they

are hot, so please keep children away from lamps. When you

leave the room, be sure to turn off the lamps. Always disconnect

power supply when changing the lamps.

Advertising
This manual is related to the following products: