Photoflex DP-FSPDKT FirstStudio Product Kit - Manual (Page 3)

PROFESSIONAL PHOTOGEAR
Visit photoflex lightingschool .com® for the best free learning resource! For detailed specifications, product tutorial videos and more, please visit www.photoflex ® .com
Rev 11/20/13
PHOTOFLEX ® WARRANTY
• Warranties only cover manufacturer’s defects and workmanship.
• FirstStar/FirstStudio and LiteIgloo equipment come with a 3 year
warranty. LiteStands come with a 5 year warranty.
• We reserve the right to inspect all merchandise returned (end users and
dealers) for warranty fulfillment.
• For returns contact Photoflex first to obtain a return authorization
number and instructions for return.
• Freight must be paid both ways by the customer or dealer.
• Warranties are valid only from date of original purchase.
• Warranties are cannot cover damage caused by accidents, improper care
or use.
Customer Support (800) 486-2674
E-mail: [email protected]
Corporate Office (831) 786-1370 • FAX (831) 786-1372
97 Hangar Way, Watsonville, CA 95076
©2013 Photoflex, Inc. ALL RIGHTS RESERVED. FirstStar ® , FirstStudio ® , LiteIgloo ® , LiteStand ® , Photoflex ®
and the Photoflex logo are trademarks or registered trademarks of Photoflex and/or its affiliates in the U.S.
and other countries. Third party trademarks are the property of their respective owners.
The sweep has Velcro tabs on each end. The end designed to be the
bottom, uses Velcro on each side, whereas the top is the edge with
Velcro on only one side. Attach the Velcro tabs on the corners of
the top of the sweep to the tabs at the top of the back panel inside
the LiteIgloo (
Figure 23). The bottom of the sweep can be attached
to the bottom of the igloo using either of two Velcro positions at the
end of the sweep. The bottom edge of the sweep can be folded over
for a shorter more curved background. Many photographers prefer
to use the unit without the sweeps and just remove the background
in PhotoShop
® . The Blue sweep can be used for Chroma key
knock-outs typically associated with video or Photoshop.
Collapsing Your LiteIgloo (Make it implode!)
Position the LiteIgloo with the Velcro door panels face up. Grab the
middle of the section where the two tension rings meet (
Figure 24)
and push that section to meet the opposite section ( Figure 25). Then
close the two sections together to fit in the storage bag ( Figure 26,
27 and 28).
Note: When collapsing the LiteIgloo it will take some force to
implode the unit. The steel frame can withstand this with no
problem.
The large LiteIgloo requires an extra step of twisting the frame in
thirds, just like the LiteDisc
® . Figures 30, 31, 32
Figure 28
Figure 27
Figure 29
Figure 24 Figure 25
Figure 23
Figure 26
Figure 22
Free Lighting Lessons
Photoflex offers a variety of lessons for using theLiteIgloo.
Visit: http://www.photoflex.com/pls/category/how-our-products-
work
Then scroll to First Studio, where there are several lessons using
the LiteIgloo or Product kit.
Visit our Lighting School at http://www.photoflex.com/pls for FREE
lighting lessons made by professionals just for you.
Figure 30 Figure 31 Figure 32