Billy Goat MV650SPH - Manual (Page 11)

Form No F082206A 11 Part No 840099
MV650SPH Self-Propelled Vacuum Owner’s Manual
4. Attach upper handle brace to lower handle using
corresponding hardware. Then repeat this step on the
other side.
- Two 1/2” wrenches.
5. Attach rod end (164) to the nozzle door rod then
secure in place by tightening jam nut.
6. Attach nozzle door rod to the nozzle door using
corresponding hardware.
NOTE: It is easier to do this with nozzle door closed.
- Two 9/16” wrenches.
7. Attach rod end to rod (as in step 5).
8. Attach nozzle door rod to the lever with
nozzle door closed and lever in hose kit
position.
NOTE: Check to see nozzle door open and
close all the way (see page 15). Tighten or
loosen the rod end (164) for any
adjustments.
Two 9/16”
wrenches.
9. Install cable ty wraps. 10. Reconnect spark plug
wire.
11. Attach the bag.
HERE
HERE