Billy Goat MV650SPH User Manual
Page 17
Form No F082206A
17
Part No 840099
MV650SPH Self-Propelled Vacuum Owner’s Manual
C
LEARING A
C
LOGGED
N
OZZLE
DISCONNECT spark plug wire before servicing unit.
1. Shut engine off and wait for impeller to stop completely.
2. Disconnect spark plug wire.
3. Wearing durable gloves, remove clog.
WEAR durable gloves. Clog may contain sharp materials.
4. Reconnect spark plug wire.
D
EBRIS
B
AG
Debris bags are normal replaceable wear items.
Frequently empty debris to prevent bag overloading with more weight than you can lift.
Bag liners are available for use in various conditions where debris will be vacuumed. (see Bag Liner Options shown
on page 1).
DO NOT place bag on or near hot surface, such as engine.
Be sure engine has come to a complete stop before removing or emptying bag!!.
This vacuum is designed for picking up trash, organic material and other similar debris (see Safety Warnings
page 4-5).
Many vacuums are used where dust is mixed with trash. Your unit can intermittently vacuum in dusty areas.
However, following these rules will help maintain your machine's ability to vacuum in dusty conditions:
•Run machine at idle to quarter throttle.
•Machine or pressure-wash debris bag if normal cleaning does not fully clean bag. Bag should be thoroughly dry
before use.
Having one or more spare Felt Filter (840194) is a good way to reduce down time while dirty bags are being
cleaned.