RCBS The Grand - Manual (Page 7)

PRESS FUNCTIONS BY STATION
The Grand is an eight-station auto indexing progressive
shotshell reloader. All functions occur on the upstroke of the
Ram with the exception of indexing, which occurs on the down
stroke of the Ram. The Index Arm may be removed for manual
indexing of the press.
STATION 1
Full length resizing and spent primer removal. Resizing is
accomplished with a steel sizing ring
(photo 20).
4
20
STATION 2
Priming. Primers are fed from the Primer Tray to the Primer
Drop Tube
(photo 21).
21
Primer is dropped from the Primer Drop Tube Collet to the
Primer Transfer Bar
(photo 22).
22
19
➞
Install Primer Shut Off Pin into Primer Tray ( photo 19).
Assembly is complete.
Install Wad Box Bracket approximately six inches from the
right side of the press to provide clearance between the
handle and the box
(photo 18). The top of the Bracket should
be flush with the bench top. Attach using the two 8x32 Wood
Screws provided. Hang Wad Box on Bracket.
18
2429_RCBS Grand Instr 1/31/05 2:33 PM Page 7