Reloop ADM-4 - Manual (Page 7)

7
ENGLIS
CH
APPlIcATIon In AccoRDAnce WITh ReGUlATIonS
- This device is an active loudspeaker which amplifies and plays low level audio signals.
- This product is authorised for connection to 220 V, 50 Hz AC and is designed exclusively for indoor application.
- If the device is used for any other purposes than those described in the operation manual, damage can be caused to the product, leading to
the exclusion of warranty rights. Moreover, any other application that does not comply with the specified purpose harbours risks such as short
circuit, fire, electric shock, etc.
- The serial number determined by the manufacturer must never be removed to uphold the warranty rights.
MAInTenAnce
- Check the technical safety of the device regularly for damage to the mains line or the casing, as well as for wearout of wear parts such as
rotary and sliding switches.
- If it is to be assumed that a safe operation is no longer feasible then the device must be disconnected and secured against accidental use.
Always disconnect the mains plug from the outlet!
- It must be assumed that a safe operation is no longer feasible if the device bears visible defects, if the device no longer functions, following
longer storage under unfavourable conditions or after major transport stress.
conTRol eleMenTS
Designation
1.
ON/OFF Switch
2. Signal Input (RCA)
3. Signal Output Subwoofer (3.5 mm Jack)
4. Volume Control
5. Bass Control
6. Treble Control
7. Screw-In Clamp for 2nd Speaker
8. Connector for Mains Cord
9. Fuse (1A)
1. 2.
3.
4. 5. 6.
7.
8.
9.