Revel LFO - Manual (Page 11)

11 LFO Programming Software
User Guide
SETTING UP AUDIOTOOLS
NOTE: If you're using a different audio measurement system, go through its setup procedure at this time.
1. Launch AudioTools on your iOS device. The main menu screen will appear.
2. Tap Settings, then touch General. The General settings window will appear.
3. If you are using the iOS device's built-in microphone, select "Enable" under Mic Compensation Filters.
4. Set your preferred distance units to either feet or meters.
5. Make sure all of the other settings match those shown in the illustration above, then select Done. The main AudioTools menu screen will return.