Revel LFO - Manual (Page 15)

15 LFO Programming Software
User Guide
Exporting Measurement Results into LFO Software
Before you can apply corrective equalization you must export your measurement results into the LFO software. The steps below explain how to export the
results from AudioTools. (If you are using a different measurement system, follow its exporting instructions.)
1. Make sure your iOS device running AudioTools and your computer running the Revel LFO software are both on same Wi-Fi network and subnet
2. In AudioTools, tap the Stop button. The Save/Recall FFT screen will appear.
Export Button
3. Tap Export. A dialog box will appear with a URL at the top.
URL
4. Open your computer's Web browser and navigate to the URL indicated in the AudioTools dialog box.
5. Select "FFT Directory."
6. From the list of fi les that appears on the screen, choose the measurement fi le you just created. Save the fi le to your computer in an easily-accessible
location.
• If you're using Safari as your Web browser, right-click on the fi lename and select "Download Linked File As."
• If you're using Internet Explorer as your Web browser, right-click on the fi lename and select "Save Target As."