Revel M22 - Manual (Page 13)

13
Note
High loop resistances that exceed 0.07ohms
(for each wire run) will cause the filter
network to mis-terminate, resulting in
considerable degradation of sound quality.
• Make all connections observing the
proper polarity, positive-to-positive (+)
and negative-to-negative (–).
Connections that do not observe the
proper polarity will cause poor stereo
imaging and diminished bass response.
If desired, contact an authorized Revel
dealer for information about the
suitability of power amplifier components
before connecting the M22 to the
associated power amplifier.
• Review the owner’s manuals for
associated audio components to
determine their connection procedures.
The M22 can be connected to the associated
power amplifier output channel as shown
in Figure 8 (above).
To connect the M22:
1. Connect one pair of loudspeaker wires
to the M22 input connectors. Then,
connect the same pair of loudspeaker
wires to the desired power amplifier
output channel.
2. Repeat step 1 to connect the second
M22 to a separate power amplifier
output channel.
Figure 8: Making Connections