Revel M22 - Manual (Page 5)

5
Adding to the proud lineage of Revel’s
Ultima and Performa Series Loudspeakers,
the M22 further solidifies Revel’s reputation
as a leading designer and manufacturer of
high-quality, high-performance loudspeakers.
Each M22 is individually hand-tuned during
manufacturing to match the production
reference standard within a fraction of a
decibel, ensuring incomparable loudspeaker-
to-loudspeaker consistency. As a result, the
M22 offers unrivaled performance from a
smaller loudspeaker.
HIGHLIGHTS
• Exceptional accuracy in a compact
form-factor
• Proprietary 6.5-inch (165mm) Organic
Ceramic Composite woofer
• Proprietary 1-inch (25mm) titanium-
dome tweeter
• High output with low distortion
• Separate woofer and tweeter filter
boards
• Gold-plated binding posts
• Placement Compensation Control
• Tweeter Level Control
• Flexible placement options
• Advanced woofer motor structure
• Magnetic shielding
• Large voice coils for wide dynamic
range without compression
• Hand-tuned to match the production
reference standard within a fraction of
a decibel
• Elegant cabinet design in real wood
veneer finishes
PRODUCT REGISTRATION
Please register the M22 within 15 days of
purchase. To do so, register online at
www.revelspeakers.com or complete and
return the included product registration
card. The product registration card serves
no warranty purposes. Retain the original,
dated sales receipt as proof of warranty
coverage.
UNPACKING
The M22 requires special care and handling
during unpacking. Pay particular attention
to the precautions that appear in this
section and to other precautions that
appear throughout this owner’s manual.
When unpacking, save all packing materials
for possible future shipping needs. Refer to
the Obtaining Service section on page 16
for additional information.
To unpack the M22:
1. Place the outer packing carton in the
upright position and fully open the top
flaps as shown in step 1 of Figure 1 at
the top of the next page.
2. Without allowing the top flaps to close,
move the outer packing carton into an
inverted position shown in step 2 of
Figure 1 at the top of the next page.
3. Lift the outer packing carton off of
the inner loudspeaker cartons as
shown in step 3 of Figure 1 at the
top of the next page. At this point,
the inner loudspeaker cartons will
be upside-down.
(continued on next page)