RiME LITE XB WIFI - Manual (Page 12)

12
How to set the Remote Systems (Wireless holder, ① in the picture)
- A wireless receiver is needed when a user uses a remote control and PC in order to
operate XB PRIME.
- Join the wireless receiver to the rare cover.
How to set Studio and Channel.
XB PRIME has both Studio and Channel mode. Each Studio mode consist of 10 strobes
(Channel)
1. How to change the strobe group
1) Press “XB” button for at least 3 seconds.
2) Turn the dial to the right or left
3) Once you choose your group, press “XB” button shortly once more.
2. How to change the strobe channel number
1) Press “XB” button for at least 3 seconds.
2) Turn the dial to the right or left
3) Once you choose Channel number, press “XB” button shortly.