SONIQ QV290 - Manual (Page 8)

６
10. Sleep Button
It can set the time of standby for sleeping. The maximum time of sleeping is 120
minutes，when you press it once, the time will reduce 15 or 10 minutes. If you set the time
of sleeping，it will delete automatically the set of OFF-TIME.
11. Volume Control Button V+/V-
Press the button [V+] to upward the selected one, press the button [V-] to make it reduce.
12. MENU Button (see the operation method).
13. Program Selector Button P+/P-
Press these two buttons, the number of program will increase one or decrease one or will
realize the choice of upward or downward items in menu of full-screen. Change the
number of program by pressing P+/P-, it will skip the number of program in MEMORY
OFF (in PRESET menu, it displays “MEMORY OFF”). If all programs are in state of
SKIP OFF，it receives only the first program when you press this button. If only one
program is in state of MEMORY ON，it receives the only program which is in
MEMORY ON .
1. Press the power switch, the power indicator will be on, and after several seconds, the
TV set will start normal operation.
2. Press the standby button on the remote controller, the whole machine will be at standby
status, and the power indicator will be on but the screen is dark. In this status, press the
standby button on the remote controller, the machine can start working again.
Note: To ensure normal operation at all times, never turn the machine on and off
frequently. Wait for at least 5 seconds before turn it on again.
3. If you want to completely turn off the power supply, please press the power switch on the
TV set and remove the power supply plug from its socket.
Note: It is not proper to place the machine in standby status for long time. Please turn
off the power switch and remove the power supply plug from its socket if the
TV set will not be used for long time.
Turn the power supply ON/OFF
Names and Functions of Controls
Operation for the Whole Machine