Speakal iPanda User Manual
Page 4
1. Connect the unit with AC Adaptor and switch the unit on.
OPERATING INSTRUCTIONS
:
Attention: your speaker is on the
"ON"
position prior to docking your iPod.
AC Adaptor
2
8. Play/Pause: press to select Play /Pause when the AIP play music from iPod.
9. Next: press to select next from iPod when AIP play music from iPod.
10. TREB +: press to increase the TREB when the AIP is working.
11. Volume-: press to increase the volume when the AIP is working.
12. Bass +: press to increase the Bass when the AIP is working.
13. TREB-: press to reduce the TREB when the AIP is working.
14. Menu UP: press to select up in menu of iPod.
15. Bass -: press to reduce the Bass, when the AIP is working.
16. Menu: press to back upstairs Menu.
17. Menu down: press to select down in menu of iPod.
18. Menu enter: press to confirm your selection.
7
2. Should you require listening to music from an iPod, Connect the iPod to the
the unit, the unit will choose iPod as current audio source automatically or press
the
"
iPod
"
button on the remote control to play the music.
3
｡｢To adjust volume: touch the left ear of the unit to reduce the volume and the
right ear to increase the volume. (NOTE: This is touching sensitive and you do
not need to press on the ears.), alternatively press
"
VOL+
"
/
"
VOL-
"
on the
remote control. When the volume is adjusted to the maximum or minimum level,
the light in the Unit mouth will stop flashing.Under the STANDBY mode, press
for 3s to restart the unit, the volume will automatically move to DEFAULT set
mode.