Speakal iPanda - Manual (Page 6)

8. The “ STANDBY ” button will switch the unit on and will also put the unit
into standby mode. When the unit is in standby mode, the indication light will
illuminate for 1.5 second in every 2.0 seconds.
4 5
9. After using the unit, please flick the switch to the “ OFF ” position at the
back of the unit, then take off iPod.
SPECIFICATIONS:
Product model AIP
Amplifier output power left/right 4W x 2, subwoofer 15W x 1
Amplifier input sensitivity ｡ﾜ 400mV
Amplifier SNR ｡ﾝ 82dB
Amplifier Distortion ｡ﾜ 0.7%
Frequency response 60Hz ~ 20KHz
Speaker units tweeter ｦｵ 35mm, subwoofer ｦｵ 94mm
Power voltage AC110-240V, 50/60Hz
if you use this model for car, please extra purchase car cigar lighter connection
cable, take out of the unit from the car and put it in the proper place when
Note : the unit is compatible with iPod nano, iPod touch, iPod classic, iPod 4th gen,
iPod 5th gen, iPod mini.
Car cigar lighter
interface
car connection cable
7. Press the " DEFAULT " button to be entering background music, and the sound
is becoming flat, but if you have something urgent , Press the " " to mute, the
light will keep flashing every1.0s. Press " DEFAULT " or " " again or press volume
button will immediately resume normal.
10. Should you require listening to music from an external source (i.e.Laptop).
Connect it to the input jack and press the
" AUX " button on the remote. If you
don't connect iPod on the unit, the unit will choose the external source autom-
atically. When the unit play music from external source , iPod will automatically
switch to standby &charge mode.
MP3
you enjoy the music in the nature.
Please use the lever handle to change cradles.