Starlight Xpress SXV-M25C User Manual
Page 11
Handbook for the SXV-M25C Issue 1 June 2004
11
Now press the ‘Create Image’ button. After a couple of seconds, your raw mono
image will be replaced by a full colour version.
If the colour is roughly correct, then all is well. However, the colour decoding is
reliant on the filter pattern being properly registered with the processing software and
this can vary. If the colour is badly wrong, try opening the ‘Set program defaults’
dialog box and altering the ‘Pixel’ and ‘Line’ offsets. Reload the raw file and try
synthesis again. If it’s still not right, experiment with just a pixel offset or just a line
offset until the colour is good.
There is every reason to expect that the image will be reasonably well colour
balanced, but if it is not, you can adjust the colour in the ‘Set Colour Balance’ dialog
box (Under ‘Colour’ in the main menu).