Starlight Xpress SXV-M25C - Manual (Page 4)

Handbook for the SXV-M25C Issue 1 June 2004
4
At the end of this process, the USB interface will be installed as a ‘BlockIOClass
device’ and the camera software will be able to access it. You can confirm that the
installation is complete by checking the status of the USB devices in the Windows
‘Device Manager’ (see above). Start up the Windows ‘Control Panel’ and select
‘System’. Now click on the tab labelled ‘Device Manager’ and all of the system
devices will be displayed in a list (see above). If the installation is successful, there
will be a diamond shaped symbol labelled ‘BlockIOClass’ and clicking on the ‘+’
sign will reveal it to be a ‘Starlight Xpress USB 2.0 SXV-M25C camera driver’ or
similar. If this device is faulty, try clicking on it and selecting ‘properties’ and then
‘update driver’. Following the on screen instructions will allow you to re-select the
correct inf file (SXV_BlockIO_M25C.inf) and driver file (SXVIO.sys), which should
fix the problem.
Adding the camera control software:
Now that the USB system is installed, the camera control program can be used to
operate your SXV-M25C. Copy the camera software files from the CD and paste
them into a suitable directory, such as ‘SXVM25’ on your computer’s C: drive. Your
directory should contain the files SXV_M25C_usb.exe, SXV_M25.hlp, bwcc32.dll
and wsc32.dll
Connecting the camera: