Stealth Cam STC-I530IR Nomad-IR - Manual (Page 25)

STC-I530IR
www.stealthcam.net Toll Free 877-269-8490
25
Viewing and deleting the images
The STC-I530IR cam offers the user different options for viewing
the images. The external LCD display on the front of the housing
will show the number of images in memory.
To wake the camera from PIR detection mode, press and hold
either the [UP] or [DN] button for about 5 seconds.
The instructions below are based on starting from a camera that
is turned off.
Viewing the image on a handheld LCD TV video monitor or your
home TV equipped with an RCA input jack
For viewing on handheld LCD TV, attach the appropriate cable to the
video out jack on the camera. Insert the other end into the video in
jack on handheld LCD TV monitor.
For viewing on home TV, attach the appropriate cable to the video
out jack on the camera. Insert the other end into the RCA video in
jack on the TV. Make sure to switch to VIDEO IN mode on your
TV. (See your TV owner’s manual for directions).
Turn on both the camera and TV monitor.