Stealth Cam STC-U735IR Skout-7 User Manual
Page 13
WWW.STEALTHCAM.COM
Toll Free 877-269-8490
13
Inserting SD memory card
NOTE: Make sure camera is in the OFF position whenever adding or
removing memory.
•
Insert SD memory card in to the SD card slot completely and in
the
correct
direction
as
shown
by
the
sticker
located
at
the
side
of
the
housing.
•
To
remove
the
SD
memory
card,
depress
the
SD
card
and
pull
out
the
card
gently.
•
SD cards must be clean (no images from other sources). If you are
using
the
SD
card
from
other
cameras,
please
make
sure
to
format
the
SD
card
in
your
computer
prior
to
use
in
your
camera.
New
cards
are
good
to
use
straight
from
the
package.
FORMAT
–
Definition:
When
you
format
a
SD
memory
card,
the
operating
system
erases
all
information
and
files
on
the
card.
Then
it
creates
an
internal
address
tables
that
it
later
uses
to
locate
information
and
files.
Formatting
also
removes
all
Hidden
System
files
as
well.
Basically
it
cleans
your
SD
memory
card
just
like
if
it
was
brand
new.
Please
make
sure
to
follow
the
guidelines
listed
below:
SD
Card
size:
2Gb
or
below,
format
using
File
System
type
“FAT”.
SD
Card
size:
4GB
or
above,
format
using
File
System
type
“FAT32”.
Do
not
use
File
System
type
“NTFS”
or
“exFAT”,
these
formats
are
not
supported.