Stealth Cam STC-U735IR Skout-7 User Manual
Page 22
WWW.STEALTHCAM.COM
Toll Free 877-269-8490
22
Setting the Time and Date in PIR operation mode:
Your Stealth Cam uses the 24hr military time format.
•
Switch
the
camera
to
the
ON
position.
Ø
LCD screen will display the camera status screen.
•
Press the [MENU] button within 30 seconds to enter the
programming mode.
•
The word PIR will be blinking, press OK to confirm the camera
operation by PIR detection.
•
Press [DOWN] button TWO times to enter Time and Date mode.
•
The word TIME will be blinking.
•
Press [OK] to enter Minute setting first.
•
The MINUTE digits will be blinking.
•
Press
[UP]
or
[DN]
to
increase
or
decrease
the
minute
value
(00
–
59).
•
Press [OK] to save your selection and enter Hour setting.
•
The HOUR digits will be blinking.
•
Press
[UP]
or
[DN]
to
increase
or
decrease
the
hour
value
(00
–
23).
•
Press [OK] to save your selection and enter Month setting.
•
The Month digits will be blinking.
•
Press
[UP]
or
[DN]
to
increase
or
decrease
the
Month
value.
(1
-‐
12).