Setup and programming – Stealth Cam STC-Z3IR Titan User Manual
Page 14
WWW.STEALTHCAM.COM
Toll Free 877-269-8490
14
SETUP AND PROGRAMMING
•
Programming is only allowed when camera’s power switch is at the
TEST/SET mode.
•
Slide the power switch from OFF to TEST/SET position; you will hear two
faint short beeps.
•
Touch M button to enter Picture or Video mode selection.
•
Picture icon will blink. To choose still picture mode touch ▶ button to
choose
this
option.
This
will
bring
you
to
the
Resolution
mode.
Resolution
icon
will
now
blink.
•
Touch ▲ or ▼ button to choose your resolution. 3M pixels. 1.3M
pixels.
Touch
▶
button
to
confirm
your
setting.
Next
will
bring
you
to
Burst
mode
setting.
Burst
mode
icon
will
now
blink.
•
Touch ▲ or ▼ button to choose your burst mode setting. Number (BIG)
icon
will
flash
and
display
the
number
of
picture
you
as
you
scroll
through
using
the
▲
or
▼
button.
Touch
▶
button
to
confirm
your
setting.
Next
setting
will
be
the
time
out
setting.
T.Out
icon
and
Number
(BIG)
icon
will
blink.
•
Touch ▲ or ▼ button to choose your time out setting. Touch ▶ button
to confirm your setting. Now the Time Out icon will blink.
•
Touch ▲ or ▼ button to choose either Second or Minute. Touch ▶
button
to
confirm
your
setting
and
then
touch
M
button
to
exit
programing
mode.
•
Note: You may see the entire screen display blink, simply touch the M
button again to confirm your settings.