Quick start guide – Stealth Cam STC-Z3IR Titan User Manual
Page 8
WWW.STEALTHCAM.COM
Toll Free 877-269-8490
8
QUICK START GUIDE
This
guide
is
designed
to
get
you
up
and
running
in
a
matter
of
moments.
To
get
the
most
out
of
this
advanced
scouting
tools,
please
read
the
manual
thoroughly
before
operating
the
camera.
If
you
would
like
to
modify
any
of
the
factory
Default
Settings,
except
for
the
Time
&
Date,
please
see
manual
for
instructions.
FACTORY DEFAULT SETTINGS:
Time
Out:
30
Seconds
Burst
Mode:
1
Still
Image
(1.3Mp
Resolution)
Video Mode: 10 Seconds (VGA Resolution)
CAMERA SETUP:
1. Install 8 “AA” cell batteries in correct polarity (+/-‐) as indicated in battery
compartment.
2. Insert SD card into the camera.
SET DATE AND TIME:
1. To
enter
Date/Time
setting,
slide
the
power
switch
to
TEST/SET
position.
2. Press
and
Hold
the
M
button
for
at
least
3
seconds.
Now
the
DATE
and
TIME
icon
will
blink.
3. Touch
▲
button
to
choose
DATE
setting.
4. Touch
▲
or
▼
button
to
increase
or
decrease
your
Month
selection.
Touch
▶
button
to confirm and move to Date field.
5. Touch ▲ or ▼ button to increase or decrease your date selection. Touch ▶ button to
confirm and move to Year field.
6. Touch ▲ or ▼ button to increase or decrease your year selection. Touch ▶ button to
confirm your setting. The Date icon turns off and the Time icon is turns on.
7. Touch ▲ or ▼ button to increase or decrease the value for Hour. Touch ▶ button to
confirm and move to Minute field.
8. Touch ▲ or ▼ button to increase or decrease the value for Minute. Touch ▶ button
to confirm and move to Second field.
9. Touch ▲ or ▼ button to increase or decrease the value for Second. Touch ▶ button
to and then touch the M button once. This will bring you back to the ready status.